Fireplace Insert Installation in Dallas, TX
If your open fireplace burns through wood and lets most of the heat escape up the chimney, a fireplace insert changes that. At ALC Chimney Service, we install gas, wood, and electric inserts in homes across Dallas, fitting each unit to your existing firebox and venting it properly so it runs safe and warm. Our certified technicians handle the measuring, the liner, the gas line if you need one, and the finish work, so you get a clean install that actually heats the room. Ready to upgrade your fireplace?
What Fireplace Insert Installation in Dallas Involves
A fireplace insert is a sealed heating unit that slides into your existing masonry or factory-built fireplace and turns it into an efficient heat source. Instead of an open hearth that pulls warm air out of the house, an insert burns fuel inside a closed firebox and pushes heat back into the room, often at efficiency rates above 70 percent.
We install three main types in Dallas homes. Gas inserts run on natural gas or propane and light with a switch or remote. Wood-burning inserts give you the real flame and crackle with far less waste than an open fire. Electric inserts need no venting at all and work well in homes without a usable chimney.
Every install starts with measuring your firebox and checking your chimney, because the insert has to fit the opening and vent correctly. From there we line the flue, connect any gas or electrical supply, set the unit, and finish the surround so it looks built-in. The result is a fireplace you actually use, with lower heating bills and a warmer living space.
Why Professional Fireplace Insert Installation Matters
An open fireplace looks great, but it loses most of its heat and can send your energy bills climbing every winter. A properly installed insert fixes that by sealing the firebox and directing warmth where you want it. The catch is that installation has to be done right, because an insert that is sized wrong, vented poorly, or fitted without the correct liner becomes a safety risk instead of an upgrade. Carbon monoxide, draft problems, and chimney fires all trace back to bad installs. Getting it done by trained technicians protects your home, your warranty, and the people inside it.
- Lower Heating Bills
- Safer Operation
- Real Heat Output
- Protected Warranty
- Cleaner Burning
- Better Home Value
Common Fireplace Insert problems we fix in dallas.
Older fireplaces and aging inserts run into the same set of issues, and most of them point back to wear, poor venting, or a unit that was never sized correctly. Here are the problems Dallas homeowners call us about most, along with how a proper insert install or replacement puts them right.
Weak Or Uneven Heat
Your fireplace barely warms the room because an oversized open firebox lets most of its heat slip quietly away unused.
Smoke In The Room
Smoke rolls back inside instead of rising because the flue is blocked, the liner is wrong, or draft is poor.
Old Failing Insert
An older insert has cracked glass, a dead blower, or a pilot that keeps going out and needs replacement now.
No Proper Venting
Your fireplace lacks a correct liner or vent, which makes any new insert unsafe until the system is fixed first.
High Energy Bills
Heating costs climb every winter because your open fireplace drains warm air right out of the house through the chimney.
Wrong Size Unit
A previous insert was fitted poorly or sized wrong, so it never seated correctly and now performs badly every winter.
Which Fireplace Insert Is Right for Your Dallas Home?
Chimney inspection + cleaning
Smoke entering the roomA blockage or draft issue is likely present — an inspection will locate the source and a thorough cleaning will restore proper airflow.
Chimney sweep
Black buildup inside chimneyThat dark coating is creosote — a flammable byproduct of burning wood that must be professionally removed to prevent chimney fires.
Chimney leak repair
Water leaking near fireplaceWater intrusion usually points to damaged flashing, a cracked crown, or deteriorating masonry — each of which lets rain travel directly into your home.
Chimney rebuild
Chimney leaning or badly damagedA leaning or severely compromised chimney is a structural safety hazard. A full rebuild is the appropriate solution when repairs are no longer sufficient.
Our Fireplace Insert Installation Services in Dallas
01
Gas Insert Installation
We fit gas and propane inserts into your existing fireplace, run the venting, connect the supply, and set you up with switch or remote control.
02
Wood Insert Installation
We carefully install EPA-certified wood-burning inserts with a stainless liner, giving you a real fire that burns hotter and cleaner than any open masonry hearth.
03
Electric Insert Installation
We set up electric inserts in homes without a working chimney, wiring them safely and giving you flame-effect heat with no venting and zero upkeep.
04
Fireplace Insert Replacement
We remove your old insert, check the firebox and flue carefully, then install a new unit that fits properly and runs the way it should.
05
Insert Liner Installation
We install the right stainless steel liner for your insert, sizing it to the unit so exhaust vents safely and your warranty stays fully intact.
06
Gas Line Connection
We run and connect gas lines for your new insert, testing every fitting for leaks so your installation meets code and lights safely day one.
Our Fireplace Insert Installation Process
This structured process eliminates confusion. Homeowners know what is happening at each stage.
01
Inspection
A technician visits your home, measures the firebox, and checks the chimney, flue, and surround to see exactly what your existing fireplace can safely support.
02
Assessment
We review the measurements and your heating goals, then recommend the insert type and venting setup that best fits your home, budget, and daily comfort.
03
Estimate
You get a clear written quote that lists the unit, the liner, labor, and any gas or electrical work, with no surprise charges added later.
04
Installation
Our team installs the insert, fits the liner, connects the fuel supply, and finishes the surround, keeping your workspace clean from start right to finish.
05
Final check
We test the unit, confirm safe venting, walk you through controls and care, and make sure everything runs exactly right before we leave your home.
AdditionalChimney & Fireplace Services
01
A full safety check of your chimney and flue to catch hidden damage, blockages, and code issues before they become a hazard.
02
We remove creosote, soot, and debris from the flue, lowering fire risk and helping your chimney draft the way it should.
03
From crumbling mortar joints to damaged crowns and liners, we repair and restore the structure to keep your chimney sound and safe.
04
A thorough cleaning of the firebox, glass, logs, and surround that removes buildup and keeps your fireplace looking and working its best.
05
Focused repair and rebuilding of the firebox itself, sealing cracks and replacing failed materials so the burn chamber stays strong and contained.
06
Repairs for masonry and gas fireplaces, covering fireboxes, valves, panels, and dampers so your hearth runs safely and heats your home again.
Why Choose ALC For Fireplace Insert Installation service in Dallas
Choosing who installs your fireplace insert matters as much as choosing the insert itself. A unit is only as good as the hands that fit it, and a rushed or unqualified install can undo every benefit you paid for. ALC Chimney Service has spent years installing and servicing fireplaces across the Dallas area, and we treat every home like it is our own. Our technicians are trained, certified, and honest about what your fireplace actually needs, so you never pay for work that does not help you. We show up when we say we will, we keep the job site clean, and we stand behind what we install. That is the difference homeowners notice.
- Certified Technicians
- Upfront Pricing
- Local Dallas Experience
- Clean, Respectful Work
- Honest Recommendations
- Workmanship You Trust:
Fireplace Insert Installation Across Dallas and DFW
We install fireplace inserts throughout Dallas and the surrounding communities. Our crews work across the city and into the wider Dallas-Fort Worth metro, so wherever you are, a local technician can reach you without a long wait. We regularly serve homeowners in Plano, Lewisville, Flower Mound, Southlake, North Richland Hills, Waxahachie, and the neighborhoods in between. Each area has its own mix of older masonry fireplaces and newer factory-built units, and our team knows how to handle both.
- Fort Worth
- Irving
- Plano
- Allen
- McKinney
- Mesquite
- Richardson
- Garland
- Frisco
- Get In Touch!
Schedule Free Inspection
Service packages & promos.
Chimney Sweep Promo
Individual Plan- Chimney Inspection
- Fireplace Inspection
- Fireplace Cleaning
- Fireplace Safety
Double Chimney
Individual Plan- Inspect 2 Chimneys
- Inspect 2 Fireplaces
- Level 1 cleaning of 2 Fireplaces
- Fireplace safety x2
Chimney Repair Inspection
Individual Plan- Inspection of Issue
- Inspection of Creosote Buildup
- Inspection of Chimney Cap
- Inspection of Fireplace
Hear from Our Satisfied Customers
We shouldn’t need anything else done again for a while but ALC has a new customer for life!
Frequently Asked Questions.
Had another question ?
How much does fireplace insert installation cost in Dallas?
Cost varies with the type of insert and the work involved. Gas and wood inserts usually run more than electric because they need venting and sometimes a gas line, while electric units are the simplest to install. The best way to know your number is a free in-home estimate, since your firebox size and chimney condition affect the total.
How long does it take to install a fireplace insert?
Most installs take one day. A straightforward electric or gas insert can be done in a few hours, while a wood insert that needs a full liner or a fireplace that needs prep work may take longer. We give you a realistic time frame during the estimate.
Do I need a chimney liner with my insert?
In most cases, yes. Gas and wood inserts vent through the existing chimney, and a correctly sized stainless liner is what makes that venting safe and efficient. Electric inserts are the exception, since they need no venting at all. We size and install the liner as part of the job.
Can I put a gas insert in my existing wood fireplace?
Yes. A gas insert is one of the most popular upgrades for an open wood fireplace in Dallas. We fit the unit into your existing firebox, run the venting and gas line, and convert it into a clean, push-button heat source without major remodeling.
Which is better for my home: gas, wood, or electric insert?
It depends on your home and how you use the fireplace. Gas gives you instant, low-effort heat. Wood gives you a real flame and strong output if you do not mind tending a fire. Electric works anywhere and installs fastest, but produces less heat. We help you weigh these during the visit.
Can you replace my old fireplace insert?
Absolutely. If your current insert is cracked, drafty, or no longer lighting reliably, we can remove it, inspect the firebox and flue, and install a new unit that fits and performs correctly. Replacement is often quicker than a first-time install since the venting may already be in place.
